TMC BILGE PUMP

Output - 450GPH

Outlet - 19mm (3/4")

Power - 12V (1.5A)

TMC

COMPACT ELECTRIC BILGE PUMP

CAPACITY: 900 GPH

FUSE: 4 AMPS

DC12V 3.5A

OUTLET: 25MM (1")

HEIGHT: 110MM

BASE DIAMETER: 100MM

Description

Rule Pumps 24, Non-Automatic 360 GPH fully submersible 12 volt DC bilge pump provides outstanding quality and value. It is economically prices and designed for small boats. It features an easy clean snap lock strainer, silent and vibrationless operation, anti-airlock protection, compact, efficient long life motor, marine grade blocked wiring, ignition protection, no burn-out when run dry and rust and corrosion protection

Specifications

Fuse Size: 2.5 amps Amp Draw @ 12 Volts: 2.1 Amp Draw @ 13.6 Volts: 2.5 Discharge Opening: 3/4" Discharge Finish :Barbed Housing Material: ABS Strainer Material: ABS Impeller Material: Nylon Shaft Material: Stainless Seal Material:Nitril/Teflon Temperature Limit: 200 F Fluid Capabilities: Bilge Water Typical Life: 1500 hours Wire Length: 29" Wire Gauge : 16 gauge Height: 3-1/2" Width: 2-3/8" Depth: 2-3/8" Weight: 9 oz Float Switches: 35 and 40 Certifications: NMMA Type Accepted Equipment # 704180, IMCI Certified - ISO 8849, CE Certified, UPC Code 0-42237-08345-6

Description

Rule Pumps 25D, Non-Automatic 500 GPH fully submersible 12 volt DC bilge pump offers many design features while keeping size and cost to a minimum. Especially popular on smaller craft, they are unmatched in pumping power and longevity. It features an easy clean snap lock strainer, silent and vibrationless operation, anti-airlock protection, compact, efficient long life motor, marine grade blocked wiring, ignition protection, no burn-out when run dry and rust and corrosion protection

Specifications

Fuse Size: 2.5 amps Amp Draw @ 13.6 Volts: 1.9 Amp Draw @ 13.6 Volts: 2.5 Discharge Opening: 3/4" Discharge Finish :Barbed Housing Material: ABS Strainer Material: ABS Impeller Material: Nylon Shaft Material: Stainless Seal Material:Nitril/Teflon Temperature Limit: 200 F Fluid Capabilities: Bilge Water Typical Life: 1500 hours Wire Length: 29" Wire Gauge: 16 gauge Height: 3-1/2" Width: 2-3/8" Depth: 2-3/8" Weight: 9 oz Float Switches: 35 and 40 Certifications: NMMA Type Accepted Equipment # 704180, IMCI Certified - ISO 8849, CE Certified, UPC Code 0-42237-08344-9

Made in the USA this pump has a specially designed motor for maximum capacity and reliable long life, fully sealed and protected from damage when run dry, with automatic air-lock release. Fully submersible. 3 year warranty.

• Capacity: 800 GPH - 50 Litres per minute
• Voltage: 12 Volts 2.8 amp
• Size: 95(H) x 61(W) mm
• Hose ID: 3/4''

Not for use in rainwater tanks or basements.
Pumping silty water will ruin the pump and voids warranty

Made in the USA this pump has a specially designed motor for maximum capacity and reliable long life, fully sealed and protected from damage when run dry, with automatic air-lock release. Fully submersible. 3 year warranty.

• Capacity: 1100 GPH - 69 Litres per minute
• Voltage: 12 Volts - 3.3 amps
• Size: 108(H) x 61(W) mm
• Hose ID: 28mm (1 1/8'')

Made in the USA this pump has a specially designed motor for maximum capacity and reliable long life, fully sealed and protected from damage when run dry, with automatic air-lock release. Fully submersible. 3 year warranty.

• Capacity: 1500 GPH
• Voltage: 12 Volts - 4.8 amps
• Size: 152mm x 108mm
• Hose ID: 28mm (1 1/8'')

Made in the USA this pump has a specially designed motor for maximum capacity and reliable long life, fully sealed and protected from damage when run dry, with automatic air-lock release. Fully submersible. 3 year warranty.

• Capacity: 2000 GPH
• Voltage: 12 Volts
• Size: 152mm x 108mm
• Hose ID: 1 1/8''